| c ) Industries Heavy Duty |
|
| PROTECTIVE Guard (Micaceous Iron Oxide) |
 |
|
Stay well protected with SANCora PROTECTIVE Guard
(Micaceous Iron Oxide) Never worry about corrosion again. SANCora PROTECTIVE Guard Micaceous Iron Oxide is a highly durable metal protective paint that is resistant to mild chemical fume attack, atmospheric pollution and high humidity due to its hard lamellar pigment, Micaceous Iron Oxide. |
| Texture |
- |
Matt Metallic Finish |
| Colour |
- |
Dark Grey and Silver
(Special colour available upon request but subject to minimum batch size) |
| Fineness |
- |
Not Applicable |
| Specific Gravity |
- |
1.42 - 1.48 |
| Viscosity |
- |
68 - 78 KU/27°C |
| Theoretical Coverage |
- |
Approx. 14 - 16m2 / litre (Depending on surface evenness) |
| Opacity |
- |
≥ 90% |
| Drying Time |
- |
Single coat at standard thickness (28oC, 50% RH)
' Hard Dry : . 2 hours |
| |
|
|
| Recommended Recoating Time |
- |
2 hours |
| |
|
|
| Thinner/Cleaner |
- |
Mineral Spirit |
| |
|
More > |
|
| |
| TRAFFIC Guard (Fast Drying Road Marking Paint) |
 |
|
Make your mark with SANCora TRAFFIC Guard
(Fast Drying Road Marking Paint) SANCora TRAFFIC Guard Fast Drying Road Marking Paint is an alkyd modified solvent based paint for road marking i.e. centerlines and edge line of a road, car parking lines and etc. It is fast drying with excellent abrasion resistance and has self-cleaning properties and excellent resistance against bleeding through bitumen. |
| Texture |
- |
Low Sheen Smooth Finish |
| Colour |
- |
White, Yellow, Red and Black
(Special colour available upon request but subject to minimum batch size) |
| Fineness |
- |
≤ 75 microns |
| Specific Gravity |
- |
1.39 - 1.64 for non– reflective (Depending on colours)
1.72 - 1.84 for reflective (Depending on colours) |
| Viscosity |
- |
70 - 80 KU/27°C for non– reflective
85 - 95 KU/27°C for reflective< |
| Theoretical Coverage |
- |
Approx. 8 - 10m2 / litre (Depending on surface evenness) |
| Opacity |
- |
≥ 70% (white colour), other colours will vary |
| Drying Time |
- |
Single coat at standard thickness (28oC, 50% RH)
' Surface Dry : ≤ 20 minutes ' Hard Dry : ≤ 60 minutes |
| |
|
|
| Recommended Recoating Time |
- |
1 hours |
| |
|
|
| Thinner/Cleaner |
- |
Thinner |
| |
|
More > |
|
| |
| EPOXY Guard (High Solid Epoxy Coating) |
 |
|
Double up your protective efforts with SANCora EPOXY Guard.
(High Solid Epoxy Coating [2 Pack])
SANCora EPOXY Guard High Solid Epoxy Coating is a two-pack finish that gives excellent resistance to oils, chemical, water and abrasion. It guarantees an excellent protection for surfaces against harsh environment conditions. |
| Texture |
- |
Smooth Gloss Finish |
| Colour |
- |
A wide range of colours. Please refer to SANCora Industrial Coating Colour Card.
(Special colour available upon request but subject to minimum batch size) |
| Fineness |
- |
≤ 25 microns |
| Specific Gravity |
- |
1.05 - 1.31 (depending on colours) |
| Viscosity |
- |
55 - 65 KU/27°C |
| Theoretical Coverage |
- |
Approx. 13 - 15m2 / litre (Depending on surface evenness) |
| Opacity |
- |
≥ 85% (white base), other colours will vary |
| Gloss |
- |
≥ 85% (white base), other colours will vary |
| Drying Time |
- |
Single coat at standard thickness (28oC, 50% RH)
' Surface Dry :≤ 4 minutes ' Hard Dry :≤ 8 hours |
| |
|
|
| Recommended Recoating Time |
- |
8 hours but not more than 7 days |
| |
|
|
| Thinner/Cleaner |
- |
Aromatic Hydrocarbon |
| |
|
More > |
|
| |
| ELASTA Guard (Floor Coating) |
 |
|
Step up with SANCora ELASTA Guard.
(Floor Coating *Anti-Slip*)
SANCora ELASTA Guard Floor Coating is based on a Vinyl-Acrylic Copolymer, giving a tough, durable and flexible paint film. It ensures protection against fungus and algae and able to withstand harsh environment. |
| Texture |
- |
Smooth Mid Sheen Finish |
| Colour |
- |
Clear, Grey, Blue, Red and Green
(Special colour available upon request but subject to minimum batch size) |
| Fineness |
- |
≤ 75 microns |
| Specific Gravity |
- |
1.03 - 1.29 (Depending on colours) |
| Viscosity |
- |
80 - 90 KU/27°C (for colours only)
65 - 75 KU/27°C (for clear only) |
| Theoretical Coverage |
- |
Approx. 13 - 16m2 / litre (Depending on surface evenness) |
| Opacity |
- |
≥ 90% (exclude clear) |
| Gloss |
- |
≥ 10% (exclude clear)
≥ 70% (for clear only) |
| pH |
- |
8.0 - 9.0 |
| Drying Time |
- |
Single coat at standard thickness (28oC, 50% RH)
' Surface Dry :≤ 45 minutes ' Hard Dry :≤ 2 hours |
| |
|
|
| Recommended Recoating Time |
- |
2 hours |
| |
|
|
| Thinner/Cleaner |
- |
Water |
| |
|
More > |
|
| |
| SILVER Guard (Heat Resistant Aluminium 200°C) |
 |
|
Turn up the heat with SANCora SILVER Guard.
(Heat Resistant Aluminium 200°C)
SANCora SILVER Guard Heat Resistant Aluminium 200°C is a specially formulated solvent based finish able to withstand temperatures of up to 200°C. Giving a brilliant bright lustre, its high durability reflects solar heat to reduce temperature built up. |
| Texture |
- |
Bright Lustre Aluminium Finish |
| Colour |
- |
Silver |
| Fineness |
- |
Not Applicable |
| Specific Gravity |
- |
0.96 - 1.00 |
| Viscosity |
- |
45 - 55 KU/27°C |
| Theoretical Coverage |
- |
Approx. 16 - 18m2 / litre (Depending on surface evenness) |
| Opacity |
- |
≥ 90% |
| Gloss |
- |
≥ 90% |
| Drying Time |
- |
Single coat at standard thickness (28oC, 50% RH)
' Surface Dry : ≤ 8 hours ' Hard Dry : ≤ 16 hours |
| |
|
|
| Recommended Recoating Time |
- |
12 hours |
| |
|
|
| Thinner/Cleaner |
- |
Mineral Spirit |
| |
|
More > |
|
| |
| SILVER Guard (Heat Resistant Aluminium 600°C) |
|
|
Turn up the heat with SANCora SILVER Guard
(Heat Resistant Aluminium 600°C)
SANCora SILVER Guard Heat Resistant Aluminium 600°C is a silicone based and fast drying finish. It is specially formulated to give excellent durability and withstand temperatures of up to approximately 600°C. |
| Texture |
- |
Bright Lustre Aluminium Finish |
| Colour |
- |
Silver |
| Fineness |
- |
Not Applicable |
| Specific Gravity |
- |
0.97 - 1.01 |
| Viscosity |
- |
45 - 55 KU/27°C |
| Theoretical Coverage |
- |
Approx. 16 - 18m2 / litre (Depending on surface evenness) |
| Opacity |
- |
≥ 90% |
| Gloss |
- |
≥ 90% |
| Drying Time |
- |
Single coat at standard thickness (28oC, 50% RH)
' Surface Dry : ≤ 8 hours ' Hard Dry : ≤ 16 hours |
| |
|
|
| Recommended Recoating Time |
- |
12 hours |
| |
|
|
| Thinner/Cleaner |
- |
Mineral Spirit |
| |
|
More > |
|
| |
| SILVER Guard (Aluminium Paint) |
 |
|
SANCora SILVER Guard is your paint-on shield
(Aluminium Paint)
SANCora SILVER Guard Aluminium Paint is a ready-mixed aluminium paint giving a brilliant bright lustre with good durability. It is also protects the substrate from moisture attack, hence providing an excellent protective property |
| Texture |
- |
Bright Lustre Aluminium Finish |
| Colour |
- |
Silver |
| Specific Gravity |
- |
0.92 - 0.96 |
| Viscosity |
- |
40 - 50 KU/27°C |
| Theoretical Coverage |
- |
Approx. 16 - 18m2 / litre (Depending on surface evenness) |
| Opacity |
- |
≥ 90%/td>
|
| Gloss |
- |
≥ 90% |
| Drying Time |
- |
Single coat at standard thickness (28oC, 50% RH)
' Surface Dry : ≤ 8 hours ' Hard Dry : ≤ 16 hours |
| |
|
|
| Recommended Recoating Time |
- |
16 hours |
| |
|
|
| Thinner/Cleaner |
- |
Mineral Spirit |
| |
|
More > |
|
| |
