Products - What We Sell
e ) Undercoat & Prime
UNDERCOAT Guard (Fast Drying White Undercoat)
 

What lies beneath is SANCora UNDERCOAT Guard
(Fast Drying White Undercoat)

SANCora UNDERCOAT Guard Fast Drying White Undercoat is a premium quality alkyd based undercoat. It is specially formulated to give excellent coverage, good adhesion and perfectly balanced for subsequent overcoats.
Texture - Smooth Finish
Colour - White
Fineness - ≤ 70 microns
Specific Gravity - 1.55 - 1.61
Viscosity - 65 - 75 KU/27°C
Theoretical Coverage - Approx. 15 - 17m2 / litre (Depending on surface evenness)
Opacity - ≥ 80%
Drying Time - Single coat at standard thickness (28oC, 50% RH) ' Hard Dry :≤ 6 hours
     
Recommended Recoating Time - 4 hours
     
Thinner/Cleaner - Mineral Spirit
    More >
 
BLOCK Guard (Hi-Performance Wall Sealer Solvent Based)
 

Secure a quality seal with SANCora BLOCK Guard
(Hi-Performance Wall Sealer) [Solvent Based])

SANCora BLOCK Guard Hi-Performance Wall Sealer is a solvent based thermoplastic acrylic resin wall sealer used for both interior and exterior. It has good adhesion and penetration properties with excellent alkali resistance and fast drying properties.
Texture - Smooth Matt Finish
Colour - White
Fineness - ≤ 75 microns
Specific Gravity - 1.37 - 1.43
Viscosity - 70 - 80 KU/27°C
Theoretical Coverage - Approx. 13 - 16m2 / litre (Depending on surface evenness)
Opacity - ≥ 80%
Drying Time - Single coat at standard thickness (28oC, 50% RH) ' Hard Dry : ≤ 2 hours
     
Recommended Recoating Time - 2 hours
     
Thinner/Cleaner - Mineral Spirit
    More >
 
RUST Guard (zinc chromate primer)
 

SANCora RUST Guard
(Zinc Chromate Primer [Grey-Green])

SANCora RUST Guard Zinc Chromate Primer (Grey-Green) is based on Zinc Chromate and inorganic pigments in a modified alkyd medium. It has anticorrosion properties and is a high quality general purpose primer for iron, steel and metal surfaces.
Texture - Low Sheen Finish
Colour - Grey-Green
Fineness - ≤ 50 microns
Specific Gravity - 1.31 - 1.37
Viscosity - 70 - 80 KU/27°C
Theoretical Coverage - Approx. 14 - 16m2 / litre (Depending on surface evenness)
Opacity - ≥ 90%
Gloss - ≥ 9%
Drying Time - Single coat at standard thickness (28oC, 50% RH) ' Surface Dry : . 4 hours ' Hard Dry : ≤ 16 hours
     
Recommended Recoating Time - 12 hours
     
Thinner/Cleaner - Mineral Spirit
    More >
 
RUST Guard (Red Oxide Primer)
 

Protection is a must against rust with SANCora RUST Guard
(Red Oxide Primer)

SANCora RUST Guard Red Oxide Primer is a modified alkyd-based primer, pigmented with red iron oxide. Commonly used to prevent rust occurrence on metal surfaces (mainly ferrous).
Texture - Low Sheen Finish
Colour - Red
Fineness - ≤ 45 microns
Specific Gravity - 1.27 - 1.33
Viscosity - 65 - 75 KU/27°C
Theoretical Coverage - Approx. 16 - 18m2 / litre (Depending on surface evenness)
Opacity - ≥ 90%
Gloss - ≥ 15%
Drying Time - Single coat at standard thickness (28oC, 50% RH) ' Surface Dry : . 3 hours ' Hard Dry : ≤ 8 hours
     
Recommended Recoating Time - 8 hours
     
Thinner/Cleaner - Mineral Spirit
    More >
 
Project Sealer
 

Seal off water for good with Project Sealer
(Alkali Resistant Wall Sealer)

SANcora® Project Sealer ~ Alkali Resistant Wall Sealer is a premium quality water based sealer with improved opacity, excellent alkali resistant and adhesion properties. It is suitable for interior and exterior masonry surface such as cement, brickwork, plaster and asbestos
Texture - Smooth Matt Finish
Colour -
Fineness -
Specific Gravity -
Viscosity -
Theoretical Coverage - Approx. 12 - 14m2 / litre (Depending on surface evenness)
Opacity -
Gloss -
Drying Time - Single coat at standard thickness (28ºC, 50% RH) ' Touch Dry : . ≤ 45 minutes ' Hard Dry : ≤ 2 hours
     
Recommended Recoating Time - 2 hours
     
Thinner/Cleaner - Water
    More >